Firmware v1.1 change log:
Fixed the LED not off when injection fail problem.
Enhanced the stability of the injecting.
Firmware update instruction
1.Download the firmware file first from here
2.Unzip the firmware file.
3.Connect the RCMloader one to your Computer via the MicroUSB cable.
If you have any questions regarding our products or services, please contact us with Email.
Technical Department: support@xkit.xyz
Troubleshooting
Problem: The LED of RCMloader one is always ON, it looks like a crash.
Solution:
1 Use a pin to lick the upper part of the reset hole and the RCMloader will reset to the normal state.
2 Upgrade to the latest firmware v1.1 following here.